Marine Spiral Butterfly Valve, API 609, GGG40, 4 IN, 5K, 10K

Product Name: Marine Spiral Butterfly Valve
Design Standard: API 609
Body Material: Ductile Iron GGG40
Size: 4 Inch, DN100
Pressure: JIS 5K, 10K
End Connection: Wafer
Operation: Manual

The Wafer Concentric Butterfly Valve is designed to prevent backflow in systems with unidirectional flow by maintaining a seal against bi-directional pressure differentials. It achieves this with a precision-machined, tightly fitting seal, gasket, and O-ring, along with flat valve faces on both the upstream and downstream sides. The valve features threaded inserts on both sides of the body, allowing for installation using two sets of bolts and no nuts. It is mounted between two flanges, with a separate set of bolts for each flange. This configuration enables easy disconnection of either side of the piping system without disturbing the other side.

Technical Specifications

» Size Range: 2-48 Inch (DN50-DN1200)
» Pressure Ratings: Class 150 LB, PN10, PN16
» Materials: GG25, GGG40, ASTM A216 WCB, A351 CF8, CF8M, CF3, CF3M
» Optional Seat Materials: Resilient NBR, EPDM, VITON
» Operation: Handle, Handwheel, Pneumatic, Electric
» End Connections: Wafer, Lug, RF Flange
» Design and Manufacture Standards: GB/T 12228, API 609
» Face-to-Face (End-to-End) Standard: GB/T 12221
» Flanged Connection Standards: ANSI B16.5, GB/T 9113
» Test and Inspection Standards: API 598, GB/T 13927
» Temperature Range: -29°C to 120°C
» Medium: Water, Gas, Oil, etc.

Concentric Lining Butterfly Valve

Concentric Lining butterfly valve adopts lining on all the parts that contact with medium inside of body, the stainless steel which is resistance of corrosion is used as stem and disc to ensure the corrosion resistance of different strong corrosive medium. The valve body and disc materials can be made of cast iron, carbon steel or stainless steel to ensure the bearing strength. Many kinds of soft sealing material such as NBR, EPDM or PTFE etc can be used as lining material to adapt to different corrosive medium or working temperature.

Structural Features

• The indicator plate has multiple opening angles ranging to 90 degrees, which is convenient to locate the gate.
• Top flange as per ISO 5211 to allow for the easy installation of gear box and actuators.
• O-rings provide positive stem sealing performance.
• Note: Alternative packing solutions available.
• Dual stem design reduces valve operating torque.
• Upper and lower bearings minimize operating torque.
• The semi-circular butterfly plate design reduces operating torque and promotes extended service life.The seal ring is supported to achieve disassembly and prevent leakage of the seal ring.
• The seal ring extends to the end of the body and is installed without additional gaskets.

ISO 5211 Top Mounting

Different End Connections Available:

Pressure/Temperature Ratings Chart: