DIN 3352 Gate Valves, ASTM A216 WCB, DN250, 10 IN, PN16, RF

Product Name: DIN 3352 Wedge Gate Valves
Design Standard: DIN 3352
Body Material: ASTM A216 WCB
Size: DN250, 10 Inch
Pressure: PN16, Class 150 LB
End Connection: RF Flanged
Operation: Handwheel
Medium: Water, Oil, Gas, etc
Temperature Range: -29°C to 595°C

Wedge Gate Valves are engineered and manufactured to achieve volatile organic compound (VOC) leakage rates of less than 100 ppm. Comprehensive baseline laboratory testing, including static and cycle evaluations, has identified critical design parameters essential for ensuring low-emission sealing in both the stem packing and bonnet gasket areas. An in-house testing procedure has been developed and is routinely conducted to verify that standard design and manufacturing processes consistently meet the maximum 100 ppm VOC leakage requirement before shipment.

Technical Specification

» Type: Wedge Gate Valve
» Nominal Diameter: DN50-DN1000
» Design Pressure: PN6-PN25
» Body/Bonnet/Wedge: Cast Steel (EN 1.0619), Stainless Steel (EN 1.4308; EN 1.4408), Alloy Steel EN 1.7335 (WC6)
» Stem: X20Cr13 or EN 1.4021, Stainless Steel (EN 1.4308; EN 1.4408)
» Seat: 13Cr, 18Cr, Stellite
» End Connections: RF Flange, Groove Flange, BW
» Operation: Handwheel, Bevel Gear, Electric, Pneumatic
» Structural Formation: BB-BG-OS & Y
» Design Standard: DIN 3352
» Face-to-Face Dimension: According to EN 558-1 15 (DIN 3202 F5 series)
» Flange Ends: DIN 2543 to 2547, EN 1092-1, GOST 12815, GOST 12819
» Butt Welded End: EN 12627
» Test & Inspection: DIN 3230

Structural Diagram

Product Features

» Anti-friction ball thrust bearing: Minimizes friction between mating components for smooth operation.
» Grub screw: Secures the yoke nut within the bonnet.
» Grease nipple: Provides lubrication to critical mating parts.
» OS&Y (Outside Stem and Yoke): External stem design for enhanced visibility and maintenance.
» Metal-sealed trims: Available in Trim #1, #5, #8, #10, and other configurations.
» Optional features:
Locking device or stem extension for added security/accessibility.
Direct mounting capability to ISO 5211 standards.
Full port design: Ensures unrestricted flow and minimal pressure drop.