3-Axis/ 5-Axis Full Servo Robot 1000-1300mm

Name: 3-Axis/ 5-Axis Full Servo Robot 1000-1300mm
SKU: 3A5AR-02
Availability: InStock
Rating: 5 (1 reviews)

Key Specifications / Features

3-Axis/ 5-Axis Full Servo Robot Manufacturer Provides 3-Axis, 5-Axis Full Servo Robot, Travel 1000-1300mm, for Injection Molding Machines (250-650 Ton).

Request a quote

Detail Information

Runma 1000-1300 Series traversing robot arm is applicable to all types of horizontal injection machine ranging from 250 to 650 ton for products and sprues take-out.

Single stage or telescopic type vertical arm, with product arm and runner arm, for two plate or three plate mold products take out.

X-, Y-, Z-axis are driven by AC servo motor, can realize products stacking up on any points inside the mold, as well as at X, Y, Z directions, can cut the runner by scissors driven and inset or embed the accessory by the cylinder.

Model	A	B	C	D	E	F	G	H	I	J	K	L
RQ-1000WD(S3, S5)	1430	\	500	1630	175	195	210	200	1050	440	1700	2500
RQ-1200WD(S3, S5)	1550			1740

Model	Applied to injection molding machine (ton)	Travel (mm)			Side posture angle (degree)	Max load (including fixture)	Time (sec)		Driven way	Working pressure (kgf/cm2)	Air consumption (nl/cycle)	Power	Power consumption	NW (kg)
		up and down	pull out	cross traveling			take-out	empty loop
RQ-1000WD(S3, S5)	250-450	1000	220-1050	1750	90	5	2	11	x, y, z AC servo motor	5-7	8	AC220±10V 50/60HZ	4.2	250
RQ-1200WD(S3, S5)	420-650	1200	220-1050	1750			2.2							260

Send your message to this supplier

Name *

Company

Email *

Phone

Message *

FAQs

Can you supply valves with 3.2 certification?

Yes, 3.2 certificates are available at an additional cost. We work with reputable third-party inspection agencies (TPI) such as BV, TUV, SGS, or LR, who will inspect the valves and issue signed certificates provided with the shipment.

Можете ли вы поставить клапаны с сертификатом 3.2?

Да, сертификат 3.2 доступен за дополнительную плату. Мы привлекаем авторитетные третьи инспекционные организации (TPI), такие как BV, TUV, SGS, LR, для инспекции клапанов. Сертификаты подписываются и выдаются этими организациями и предоставляются вместе с клапанами.

¿Pueden suministrar válvulas con certificación 3.2?

Sí, el certificado 3.2 está disponible con coste adicional. Contamos con organismos de inspección reconocidos como BV/TUV/SGS/LR para inspeccionar las válvulas. Los certificados serán firmados y emitidos por estos TPI y se entregarán junto con las válvulas.