Installation Considerations of Ceramic Valves

As the new products, ceramic valves now have been widely used in thermal power plants, iron and steel, petroleum, chemical, papermaking, bio-engineering and other industries. And there are five points which you should pay attention to when installing and maintaining a ceramic valve.

1 Ceramic valves should be installed vertically (valve stem in a vertical position, the hand wheel at the top);
2 If a ceramic valve is frequently switched on/off, then you should do lubrication at least once a month;
3 Check the packing site. It is required to have a tight compression to ensure the sealing of packing and flexible on/off;
4 Hand wheel, handle and drive mechanism are not allowed to use for lifting and collision is forbidden;
5 When installing a ceramic valve, a necessary space should be left for the valve driver.
This technical article tells us five points about the installation considerations of ceramic valves.


Send your message to this supplier


Related Articles from the Supplier

Related Articles from China Manufacturers

Related Products Mentioned in the Article

XIAMEN LANDEE INDUSTRIES CO., LTD.

XIAMEN LANDEE INDUSTRIES CO., LTD.


Source: https://www.chinesevalves.com/installation-considerations-of-ceramic-valves.html